Skip to Content

Hi‑Vis Clothing for Winter Service: Standards, Materials and Procurement Tips

Hi‑Vis Clothing for Winter Service: Standards, Materials and Procurement Tips

Winter operations increase risks: snow, fog and darkness reduce visibility, slippery surfaces raise accident risk, and wet conditions undermine insulation. This article explains how targeted hi‑vis clothing keeps winter‑service teams safe, visible and weather‑ready. It’s aimed at construction, municipal depots, logistics, authorities, resellers and families in Switzerland and provides specific standards information, material recommendations, care instructions and a procurement checklist.

Why dedicated hi‑vis clothing is important in winter

In winter familiar hazards are amplified: visibility drops in snowfall and fog, daylight hours shrink and wet cold reduces the protective performance of textiles. Well designed winter hi‑vis clothing improves long‑distance recognition, prevents saturation with moisture and keeps teams mobile and operational.

Relevant standards and Swiss guidance (practical)

Standards are crucial for specifications and tenders. The following information is guidance; for binding tender use we recommend checking the actual standard texts and the detailed notes on our site. EN ISO 20471 kurz erklärt and reviewing SUVA recommendations and any applicable cantonal rules.

  • EN ISO 20471 (visibility): The standard defines three classes (1–3) and minimum areas of fluorescent background material and retroreflective tape. Typical minimum areas (guidance only — check the standard/documentation before tendering): Class 3 (highest visibility) – total fluorescent background area typically around 0.80 m²; Class 2 – about 0.50 m²; Class 1 – about 0.14 m². Retroreflective tapes must be arranged (chest, back, shoulders/arms/legs) to ensure lateral recognition. For clearing and spreading crews working near traffic, Class 2 or 3 is recommended.
  • EN 343 (weather protection): EN 343 assesses rain protection by two values: waterproofness (water column) and breathability (e.g., RET or MVTR). Practical requirements: for prolonged wet work at least Class 3 waterproofness combined with good breathability (low RET). Examples: jackets with a water column ≥ 10,000 mm and good MVTR are appropriate for intensive winter use. In tenders specify water column and breathability values rather than only vendor names.
  • EN ISO 20471 + EN 343 combination: When evaluating offers check combined performance (visibility must be preserved even when a garment is coated/laminated) and the labelling that shows which combinations were tested (e.g., EN ISO 20471 Class 3 tested together with EN 343 Class 3).
  • Disclaimer / compliance note: This information is for guidance and is not legally binding. Authorities and procurers should check SUVA recommendations and cantonal requirements and consult legal/safety officers if in doubt.

Visibility in snow, fog and darkness — colours, reflective materials and contrast

  • Signal yellow and signal orange remain most conspicuous against snowy backgrounds; contrast panels in dark tones improve contours and recognition in low light.
  • High‑retroreflection tape is critical on wet surfaces and under headlights — correctly placed on chest, back and arms and, where possible, on legs.
  • Additional contrasting inserts (e.g., darker underlayers or sleeve ends) help detect movement more easily.

Weather protection + insulation: materials, membranes, breathability and layering

For winter work follow the layering principle: base layer (moisture‑wicking), insulation layer (fleece or synthetic fill) and an outer weather layer (waterproof, breathable membrane). Check specific performance data: waterproofness (water column in mm) and breathability (MVTR g/m²/24h or RET).

Multifunction vests work well as mid layers because they allow freedom of movement and add pockets. Korntex products are listed on Multifunction vests for municipal depots and Functional vests for emergency teams. When choosing, check the measured values in the technical data sheets.

Footwear, gloves and accessories: standards, requirements and examples

  • Safety shoes (e.g., S1, S3): Standards such as EN ISO 20345 define classes. Briefly: S1 provides basic protection (toecap, antistatic), S3 adds penetration resistance and water resistance or a waterproof membrane and a grippy sole — S3 is often appropriate for winter spreading operations. Check tested penetration protection (e.g., midsole), toe protection and water‑resistant features.
  • Slip resistance: For icy and treated surfaces tread design and rubber compound are key. Tender specifications can require test values (e.g., SRE, SRC) or practical friction test results.
  • Gloves: Layered systems (liner with thermal padding + over‑glove with water‑repellent shell) are flexible. Look for tested cut/puncture protection levels, wet‑condition grip and insulation (given as comfort temperatures) where applicable.

Fit, sizes and freedom of movement

Hi‑vis clothing must allow sufficient freedom of movement: ample arm and knee room, pre‑shaped cuts and adjustable cuffs. For teams request size samples before bulk orders. Body shapes, outerwear and gloves heavily influence correct sizing.

Care, maintenance and re‑proofing (practical)

Regular care preserves visibility and waterproofness. Practical recommendations:

  • Washing: follow the care label; typically wash at 30–40°C with a technical detergent, no fabric softener, gentle spin.
  • Re‑proofing: when the beading effect declines, re‑proof garments. Use appropriate fluorocarbon‑free DWR treatments for outerwear and follow manufacturer instructions for application and drying (e.g., tumble‑dry activation if permitted).
  • Reflective tape: visually inspect for cracks, delamination and dulled areas; strongly discoloured or cracked materials should be replaced because retroreflection will fall. Document inspection intervals (e.g., weekly visual check, seasonal functional test).
  • Repair & replacement: repair seams and seals promptly; replace items with permanent damage. A formal care and replacement plan minimizes downtime.

Procurement in Switzerland: tender tips for authorities and depots (practical)

  • Formulate technical requirements precisely, e.g. “EN ISO 20471 Class 2 or 3, fluorescent minimum area X m² (see standard), retroreflective tape on chest and back, water column ≥ 10,000 mm, MVTR ≥ Y g/m²/24h.”
  • Request prototypes/sample quantities before award and test fit, workmanship and function in real use (e.g., one week in operational conditions).
  • Negotiate volume discounts, personalization (e.g. Custom marking for hi‑vis clothing) and services such as replenishment and claims handling.
  • Resellers can be integrated via the Become a reseller & dealer programme to ensure local supply and support.

Practical use cases — short examples

Municipal depot

The depot combines waterproof hi‑vis jackets (EN 343), insulating multifunction vests and slip‑resistant safety shoes. Readily available spare parts and location‑marked personalization simplify coordination. Pay attention to documented inspection intervals and sample approvals.

Logistics company

Logistics teams benefit from breathable high‑visibility jackets, elastic hi‑vis pants and durable gloves for frequent vehicle transitions. Test gloves with vehicle handles.

Family use

For families on private roads warm hi‑vis vests with reflective overlays are often sufficient; volunteer helpers should use tested Class 2 hi‑vis vests. Note that children’s sizes and fit require special checks.

Checklist for purchasing and operational readiness

  • Define visibility class (EN ISO 20471) and specify minimum areas
  • Define waterproofness (water column) and breathability (MVTR/RET) (EN 343)
  • Test samples and run trial deployments
  • Perform fit tests for different body sizes
  • Create a care plan and spare‑parts schedule (document inspection intervals)
  • Clarify marking/personalization
  • Agree supplier support and training

Frequently asked questions (FAQ)

See the FAQ section below for short, practical answers on standards, colours, care and procurement.

Structured data & on‑page recommendations

To improve search visibility we recommend adding the FAQ as FAQSchema (JSON‑LD) and the checklist as HowTo/Checklist Schema on the article page. Markup helps with rich snippets and increases CTR. Our editorial team can supply the markup; implementation details should be discussed with your web team.

Conclusion and recommendations

Winter hi‑vis clothing reduces accident risks and improves operational capability. Key factors are appropriate visibility classes, waterproof but breathable materials, slip‑resistant footwear and a clear care and replacement plan. Use sample testing and define technical tender requirements. For brochures, sample kits or personal consultation contact Korntex Suisse AG — we assist with product selection, personalization and tendering.

Further resources: Hi‑vis vests for winter service, EN ISO 20471 kurz erklärt, Custom marking for hi‑vis clothing.

How to choose and print safety vests for companies in Switzerland
Preis auf Anfrage